1. Main Chassis Assembly

FBX Robot Curriculum, Module No. 1

For this step, you will need the following parts:

Place the Chassis (FBX-1) upside down, as shown below. Then, attach the two Chassis Support Rods (FBX-15) using four M3x6mm Allen Screws (FBX-21), as shown below.

PreviousIntroduction Next2. PCB Board Assembly

Last updated 5 months ago

Was this helpful?

For this step, you will need the following parts:

Place the Chassis (FBX-1) upside down, as shown below. Then, attach the two Chassis Support Rods (FBX-15) using four M3x6mm Allen Screws (FBX-21), as shown below.